Sportplus SP-SC-201, User Manual

Page: 21 / 60

21
6. WHEEL REPLACEMENT
• The wheels should be replaced when they are worn down.
• Replacement wheels are available as accessories.
• It is advised to also replace the bearings when you replace the wheels.
• To replace the wheels, loosen the axle bolts with two hex keys (size 5) and remove the
wheel from the axle.
• The ball bearings can be pushed fro the wheel with a screwdriver or hex key if you wish to
continue using them in the new wheel.
• Insert the bearings and spacer sleeve into the new wheel and mount to the frame with the
axle bolts. Make sure the axle is securely tightened before using the scooter!
DETAILED VIEW OF WHEEL AND BALL BEARING
7. MAINTENANCE, CLEANING AND CARE
• After the assembly and before using the home trainer, always make sure that all bolts/nuts
are fully and correctly tightened.
• Use a dry or damp cloth only to clean the product; do not use special cleaning agents!
• Check the product for damage or traces of wear and tear before and after each use. Do not
alter the product in any way!
• For your own safety, use original replacement parts only. Contact our customer service to
order appropriate parts.
• If parts become damaged or if sharp edges or corners should develop, the product may not
be used any more. In case of doubt, please contact our customer service.
• Store the product in a safe place where it is protected from the elements, cannot be damaged,
and cannot injure anyone.
8. NOTES ON DISPOSAL
Packaging materials are raw materials and can be recycled. Separate the packaging
materials correctly and dispose of them properly in the interest of the environment.
Your local administration can provide additional information.
Used devices do not belong in household waste!
Dispose of used devices properly! Doing so helps fulfill our responsibility to protect
the environment.
Your local administration can provide information on collection points and opening
hours.
SP-SC-201_202_203_204-IM-V03-INT.indb 21 4/26/2021 12:38:40 PM