16
Wearing Your Custom Edge
1.
Make sure you insert the correct product in each ear (Left and
Right specific).
Red Shell
for Right Ear
Blue Shell
for Left Ear
2.
Hold your forefinger and thumb with the small, tapered end
pointed toward your ear. Gently insert the Custom Edge into
your ear canal and push it into place with your forefinger.
Insertion may be made easier if you use your other hand to
gently pull the back of your ear (toward the back of your head)
while inserting the Custom Edge.
3.
Once the Custom Edge is inserted snug into the ear canal, turn
volume control wheel forward to increase volume, backwards to
decrease volume. Push the push-button (On 90 and 360 Models
Only) to move through the preset programs. One beep means
you are on program 1, two beeps for program 2, three beeps
for program 3, and four beeps for program 4.
4.
To remove the Custom Edge from your ear, place your
forefinger under your ear and gently push upward.
This action will loosen your Custom Edge so that you can grasp
the pull cord with your thumb and forefinger, and remove it.
Summary of Contents for custom edge
