12
1-800-732-0144
WWW.SPORTDOG.COM
13
PROGRAM THE REMOTE TRANSMITTER
The Remote Transmitter has seven operational modes to allow you to select the best match for your type
or style of training. The Remote Transmitter is factory set to mode 1. There is also one programming mode:
Mode V/T (Change ID Codes) on page 15.
TO CHANGE THE MODE:
1. Referring to the following table, adjust the
Intensity Dial to your desired mode.
2. Turn the Remote Transmitter over.
3. Using a pen or the tine on the buckle of
your collar strap, press and release the
Mode Button. When the Mode Button is
pressed, the Transmitter Indicator Light will be
solid in color. When it is released, it will flash
the number of times for the mode selected.
For example, if mode 4 is desired, adjust the Intensity Dial to Level 4. Once the Mode Button has been
depressed, the Transmitter Indicator Light will be solid and, once the mode button is released, the
Transmitter Indicator Light will flash 4 times.
S
TE
P
::
04
MODE UPPER BUTTON
FUNCTION
LOWER BUTTON
FUNCTION
SIDE BUTTON
FUNCTION
NUMBER
OF DOGS
1*
Continuous stimulation
(Level set by intensity dial)
OR
Vibe if V/T on Dial
Momentary stimulation
(Level set by intensity dial)
OR
Vibe if V/T on Dial
Tone only
1
2
Continuous stimulation
(Level set by intensity dial)
OR
Tone if V/T on Dial
Momentary stimulation
(Level set by intensity dial)
OR
Tone if V/T on Dial
Vibe only
1
3
Dog 1
: Continuous
stimulation
(Level set by intensity dial)
OR
Tone if V/T on Dial
Dog 2
: Continuous
stimulation
(Level set by intensity dial)
OR
Tone if V/T on Dial
Dog 3
: Continuous
stimulation
(Level set by intensity dial)
OR
Tone if V/T on Dial
3
4
Dog 1
: Continuous
stimulation
(Level set by intensity dial)
OR
Vibe if V/T on Dial
Dog 2
: Continuous
stimulation
(Level set by intensity dial)
OR
Vibe if V/T on Dial
Dog 3
: Continuous
stimulation
(Level set by intensity dial)
OR
Vibe if V/T on Dial
3
5
Continuous stimulation
(Level set by intensity dial)
OR
Tone if V/T on Dial
Momentary stimulation
(Level set by intensity dial)
OR
Tone if V/T on Dial
Remote Launcher
1
6
Continuous stimulation
(Level set by intensity dial)
OR
Vibe if V/T on Dial
Momentary stimulation
(Level set by intensity dial)
OR
Vibe if V/T on Dial
Remote Launcher
1
7
Continuous stimulation
(Level set by intensity dial)
OR
Tone if V/T on Dial
Momentary stimulation
(Level set by intensity dial)
OR
Tone if V/T on Dial
Locate Remote Beeper** 1
V/T
(ID CODE)
N/A
N/A
(See STEP 7)
N/A
* Factory Default Mode
** Locate Remote Beeper: The Side Button turns run mode off and locates the Remote Beeper. To enable run mode
again, press and hold the Side Button for 3 seconds.
400-1594-2.indd 12-13
7/31/15 10:27 AM
