Removing the rear wheel from your A-bike.
This is a two stage operation. First the brake band is moved out of
the way. Then the wheel is removed.
1. Place bike in folded position. (this
slackens the brake cable)
2. Remove two Brake Assembly bolts.
3. With the bike folded, use the slack in
the brake cable and withdraw the Brake
Assembly out of the crank casing. Do
not remove cable from Brake band.
4. Remove rear axle bolts. Please
note that the bolt on the left hand side
of the bike is Left-hand threaded and
therefore can be undone by turning
clockwise, standard bolts are undone
by turning them counter-clockwise.
7R XQGR ERWK EROWV \RX PXVW ÀUPO\ KROG
the wheel still while turning each bolt.
Fixing a puncture (2)
25
