P.
2
PAUSE
Double click the button to pause the timing function. Double click means pressing the button twice within
one second. (Fig. 6) The time will freeze and no additional laps will be counted. When you are ready to
resume, just press the button again to start the timing function.
Fig. 6
SUMMARY MODE
Press the button at the end of your final lap ( a regular quick press) and then, to finish the timed activity
and go into the
SUMMARY
mode, press and
hold
the button for at least three seconds. You can do this
immediately or even hours later. Your SportCount Chrono 200 “knows” that the time between the end of
the final lap and the time you held the button down to go into summary mode was not a true lap, and it will
automatically eliminate the “false lap” so that your workout statistics will be accurate. For example, if you
completed 30 laps, and some time later held the button down to go into the summary mode, the
SportCount will display the “false lap” number 31, as shown in (Fig. 7). It will then discard the false lap
data, and display the corrected total lap count, “T 30”. In 1.5 seconds, it will automatically display the
TOTAL TIME
, and flip back and forth between
TOTAL LAP
count and
TOTAL TIME
every 1.5 seconds.
Push the button again to show the
AVERAGE LAP
, 1'10.02 in the Fig.8 example.
FASTEST LAP
number and
FASTEST LAP
time come next (Fig. 9), followed by
SLOWEST LAP
number and
SLOWEST
LAP
time (Fig.10). Pressing the button after this will start the summary over again with
TOTAL LAP
count and
TOTAL TIME
. Pressing the button after this will show the individual LAP times starting from
LAP 1 through the last LAP, then return to
TOTAL TIME
.
Fig. 7
Fig. 11
Fig. 8
Fig. 9
Fig. 10
INDIVIDUAL LAP MEMORIES
After you have gone through the summary mode statistics, push the button once again to begin reviewing
individual lap times (Fig. 11). It will start with”L1, flipping to the time for lap 1, push the button to go to lap
2, etc. The Chrono 200 can store the first 200 LAP times. However, statistics such as average, fast, slow
and total lap times remain accurate for up to 999 laps. When the 200 memories are used up, the elapsed
time display will flash.
RESET/TURN OFF
From the SUMMARY MODE, press and hold the button 3 seconds to RESET the Chrono 200 and the
display will once again return to zeros. But be careful, because when you reset your Chrono 200, all lap
times will be erased. When left in the reset mode for 30 minutes, the display will shut down automatically
to conserve battery life. Press the button to re-activate.
