background image

 

If  you  set  the  number  of  clock  digits  to  “3”  and  want  the  timer  to  display  M:SS,  set  the  First 
Clock Digit Value to “6.” 

 

If you set the number of clock digits to “2” and want the timer to display SS, set the First Clock 
Digit Value to “7.” 

 

Parameter 4:  Horn Length 

(Available only when parameter 0 is set to “1”) 

 

Use the number keys on the handheld controller to specify how long the horn will sound, in seconds. 

 

Parameter 5: Count Up / Count Down 

(Available only when parameter 0 is set to “1”) 

 

Press the “1” key to make the timer count up from zero to the user-programmed stopping time, if 
programmed.  If no user-preset stopping time is entered when the timer is in count up mode, the timer 
will count up indefinitely.  Press the “0” key to make the timer count down from the user-programmed 
starting time to zero.  

 

Parameter 6: 12-hour/24-hour Clock Format 

(Available only when parameter 0 is set to “3”) 

 

Press “0” to configure the display to show the time of day in a 12-hour clock format.  Press “1” to 
configure the display to show the time of day in a 24-hour clock format. 

 

NOTE:  Once all parameters have been set, press and hold the NEXT key until the unit returns to 
display mode. 

TIMER OPERATION

 

 

When the unit is configured to count up a user-preset stopping time may be entered, but is optional.  
If a user-preset stopping time is entered and the timer is started the timer  will  begin  counting  up  from 
zero  and  stop  at  the  user-preset  stopping  time.    If  a  user-preset stopping time isn’t entered and the 
timer is started the timer will begin counting up from zero and will count up indefinitely until it is stopped. 
 
When the unit is configured to count down a user-preset starting time must be entered.  Once a user-
preset starting time is entered and the timer is started, the timer will begin counting down from the 

user-preset time to zero. 

 

User-preset stopping times (for count up mode) and user-preset starting time (for count down mode) 
are entered using the same procedure. 
 

To enter user-preset starting/stopping times: 

 

1.  Press and hold the SET CLOCK key until the display clears. 
 
2.  Using the numeric keypad, enter the desired starting/stopping time.
 
3.  Press the NEXT key followed by the NEW GAME key to set the new time.  

 

Summary of Contents for ST-15











Reviews: