User manual
for product code 329 8406
Version 09/2022 |
Page 6
Maximum load:
200 kg
2. Warnings
Please note:
•
Do not overload or stand on the weight sledge.
•
Be aware that sharp edges could damage the surface.
•
The sledge is best stored in a closed room at a temperature of no less than 15°C and humidity of no more than 65%.
•
The equipment must only be used for its intended purpose. Modifications/misuse of any kind will compromise safety
and render the warranty void.
3. Assembly
Tools required:
13 mm spanner (not included)
Number of people required:
1
Time required:
5 minutes
Parts list
:
1 frame
4 runners
16 M8 lock nuts
2 M8 nuts
2 M8×70 hex-head screws
2 vertical handlebars
1
horizontal handlebar
1 weight stack pin
1 weight plate adapter
< Gesamtdarstellung des Artikels mit Nummerierung aller Komponenten aus Stückliste
zentriert, Abbildungsbeschriftung (
Abb. 2:
Artikelbezeichnung) >
Assembly step 1
Attach the runners
to the underside of the frame
by screwing them to the relevant attachment points, using the M8
lock nuts
.
Assembly step 2
Then attach the weight stack pin
to the sledge’s centre strut using the hex-head screws
and the M8 nuts
.
Assembly step 3
Insert the vertical handlebars
into the round receptacles and secure them with the locking pins. Then attach the
horizontal handlebar
by sliding its holders over the vertical handlebars and secure with the locking pins. The vertical
handlebars can be conveniently changed from the front to the back of the sledge (and vice versa), allowing you to alter your
workout direction quickly and easily, even when the sledge is fully loaded.
Assembly step 4
Before use, make sure that the locking pins are engaged and all screws are fully tightened.
