Instruction manual
for product code 323 5805
Version 02/2020 |
Page 9
Parts list
• 1 ladder
• 1
slide
• 1 safety tube 20/2/530 mm
(attached to slide)
• 2 handrails, 20/2/80 mm tubing
• 2 handrails, 20/2/40 mm tubing
• 6 anchor bolts, 10×100
• 16 lens head bolts, 10×25
• 26 washers, 10×35
• 4 safety cap nuts, М10
• 1 H400 support (
attached to slide)
• 18 sa
fety nuts with teflon ring, M10
• 3.6 m non
-slip strip, 25×360 (attached to slide)
• 2
connectors for D16mm hose (attached to slide)
Assembling the slide
Step 1
Connect the two parts of the slide using the bolts supplied.
Step 2
Place the two handrails in the holes provided and fasten with the corresponding washers and nuts.
Step 3
Set the slide up at its intended location and attach it to the foundation using the bolt anchors.
Step 4
Attach the water hoses to the clamps on either side below the handrails.
The existing connection has a diameter of 16 mm. The hose must therefore be slightly larger.
Transportation and packaging
For easy and safe transportation, the slide has been disassembled with the upper handrails of the ladder also disassembled
and included. The slide comes in two boxes: the slide and ladder are packed separately with polyethylene, five-layer
corrugated cardboard and wrapped in film.
Please note:
Do not compromise the integrity of the packaging during transportation and loading.
The product has to be secured and/or tied down so that it will not move during transport.
Storage
• Do not damage the packaging.
• Do
only store the slide in its original packaging.
• Store the
slide in a dry environment at temperatures b5°C and +25°C.
•
Do not store for more than six months.
