User manual
Product codes: 111 5909 & 111 6003
Sport-Thieme Steel Cable
with Hook and Turnbuckle
Thank you for choosing a Sport-Thieme product!
Please read the following notes carefully before use so you can enjoy this product safely and keep these
instructions for future reference.
If you have any questions, our team is here for you.
Version 06/2013 |
Page 1
Assembly instructions
1)
Fully open the turnbuckle.
2)
Attach the turnbuckle (incl. pressed cable end) to an available eyelet on one side.
3)
Pull the other end of the cable to the relevant attachment point on the other side.
4)
Attach the snap hook to the eyelet provided.
5)
Insert the enclosed cable-eye stiffener into the snap hook.
6)
Open the clamps fully and guide the cable through.
7)
Then continue to guide the end piece of the cable through the snap hook, over the cable-eye stiffener and into
the clamps.
8)
Tighten the clamps by hand.
9)
Stretch the cable so it is taut (adjusting its length as necessary) and tighten the clamp screws.
10) Adjust the tension on the cable via the turnbuckle to suit your requirements.
When tightening the cable, please bear in mind that too much tension could cause damage to the structure it is
attached to.
Snap hook
Crimp
Turnbuckle
Clamps
Cable-eye stiffener
Cable-eye stiffener
Cable