Spon NAS-8507B, User Manual, Page: 7 / 13

IP column loudspeaker User Manual
5
Terminal Devices Scanning Tool
（
1
）
Under the menu of [optical disc:\tool software\
]find “IP audio config tool” and run it, after starting, input the defaulted
password“123456”.
（
2
）
Please select the [forcing configuration] from the right menu, then filling each correct parameters in the[terminal
parameter]. It will finish IP parameters configuration once pressed “sending parameter”.
Remark: 1. If use Win7 system operation, please use the administrator mode to run and close all the firewalls and
related software.
2. The terminal scanning tools can only set the network parameter configuration to one terminal at one time,so
please ensure one computer only connect with the one target terminal when using this ways.
Webpage Mode
Enter into the IP column loudspeaker web interface, then modify the terminal each parameters according to the environment,
after setting completed, click
“save”.
Specific operation steps please refer to custom terminal parameters in the network settings.
Custom Terminal Parameters
Login Web Interface
（
1
）
Please input the IP column loudspeaker to the address column of the browser (the factory default IP address is
192.168.1.101), then enter.
（
2
）
Enter the user name and password in the web page
（
the default user name and password is admin
）