77
Spohn & Burkhardt
DRAFT
Shock absorption
Adjust the shock absorption as follows.
Set the switch (
12.2
)
(see Figure 26 “Pneumatic spring system: Adjustments”, page 76)
(hard), "2" (medium) or "3" (soft) to set the required shock absorption.
Note
The "medium" setting is not available on all variants.
6.4. Adjusting armrests
6.4.1. Armrests AS1-18 and AS1-30
Figure 27.
10
10.1
10.2
10
10.1
10.2
AS1-18
AS1-30
Armrests AS1-18 and AS1-30: Adjustments
The armrests (
10
) AS1-18 and AS1-30 can be adjusted for height and tilt, as well as forward and back-
ward.
Adjust the armrest (
10
) tilt as follows:
1. Undo the tommy screw (
10.1
) and adjust to the required tilt.
2. Retighten the tommy screw (
10.1
).
Adjust the armrest (
10
) height as follows:
1. Undo the tommy screw (
10.2
) and adjust to the required height:
2. Retighten the tommy screw (
10.2
).
Adjust the armrest (
10
) forward and backward as follows:
1. Undo the tommy screw (
10.1
) and adjust to the required position:
2. Retighten the tommy screw (
10.1
).
Summary of Contents for FS Series
