DRAFT
76
Spohn & Burkhardt
Adjusting weight
Note
The weight must be adjusted without any load on the seat
Adjust the weight as follows:
Actuate the rotary knob/the lever (
11.1
) until the correct weight appears in the window (
11.2
).
Adjusting height
Caution!
Always raise the seat for the height adjustment between 2 persons to prevent injuries to
the back.
Adjust the height as follows:
Raise the driver's seat until it audibly engages in the required position.
If the driver's seat is raised past the last setting (stop), the driver's seat drops back to the lowest position.
6.3.2. Pneumatic spring system
Note
The weight must be adjusted with the load on the seat
Figure 26.
12.1
12.1
12.2
12.2
Pneumatic spring system: Adjustments
Weight
Adjust the weight as follows:
Actuate the lever (
12.1
), the correct weight is set automatically.
Adjusting height
Adjust the height as follows:
Actuate the lever (
12.1
) upward or downward to adjust to the required height.
If the end stop is reached at the top or bottom, the height is modified automatically to ensure minimum
spring travel.
Summary of Contents for FS Series
