SPM NINA1, Operator'S Manual

Page: 50 / 68

Data di emissione:
December, 2013
Revisione:
1
Pag. :
50/68
9. OPERATING INSTRUCTIONS
Activating the main switch A on the front right
side of the unit and then, only for NINA2, the
small one (B for the right bowl, C for the left
one), the augers will start rotating and mixing
(fig.10).
!WARNING!
Each bowl is equipped with a very efficient
safety mechanism, if the main cover is not
correctly positioned, NINA1 will not work.
!WARNING!
The refrigerating system is activated when at
least one LED is switched on; in order to avoid
any damage, before activating it, is necessary
to fill up the bowl; failure to do so could damage
the unit.
The machine is provided with an electronic
control board that perfectly regulates the
refrigeration system in both the freeze and
defrost mode; as soon as it will be switched on
in the freeze mode, the consistency will be
regulated by operating with the + and – buttons
(fig.11).
In order to activate the refrigerating system in
defrost mode it is necessary to press the –
button an keep it pressed until the first and the
last LED of the scale will turn on.
In order to exit from the defrost mode it is
necessary to press the + button an keep it
pressed until all the LED will be switched off.
Important
Do not use the unit with the refrigerating
system activated (this means in both freeze or
defrost mode) with water or sanitizer in the
bowl, the machine will be damaged.
Fig. 10
Fig. 11
A
B C
A