4090 Woodchipper
Introduction
Owners Manual
4
1.1
How to use your Owner’s Manual
This owner’s manual is a very important part of your new machine
and should remain a permanent part of it. If the machine is sold, the
operator’s manual must go with it.
By reading the operator’s manual you will help yourself and others
avoid unnecessary personal injury and/or damage to the machine
and will also allow you to perform maintenance to keep your machine
operating properly. The information recorded in this manual will help
you use this machine safely and effectively. Once you know how to
operate the machine correctly and safely, you can train others to
operate the machine as well.
If your machine has been ordered with any options or attachments,
please refer to the option safety section of the
individual operator’s
manual that is included with that specific accessory.
The machine that is used in this manual for illustration may differ
slightly from your model. It will be similar enough to help you
understand our instructions.
Throughout this manual the terms “Left Hand” and “Right Hand” will
be used. These sides are determined when standing in front of the
engine by the hitch.
The “Throttle Control” side of the engine is the
right side.
Also “Back” and “Front” will be used. On the 4090
woodchipper the
“Back” is referred to the chip discharge side. So the
discharge chute would be located on the back left of the 4090
woodchipper.
Your machine has been tested and inspected to pass quality control
at Split-
fire’s Manufacturing facility to ensure good performance prior
to leaving the factory.
