Step4
Step5
Step6
Silicone the entire unit where metal meets wall and curb, we recommend you let silicone set for 24 hours before using shower
Attach the exterior handle (H) and the interior handle (G) to the door with
two # 6 – 32 X 1 1/4” round head screws (K).
H
G
K
J
Next, take the drip bar with tape (I) and the clear drip bar vinyl (L). Slide the
vinyl into the groove at the bottom of the drip bar. Leave 1/4” hanging out at both
ends of the drip bar. Crimp both ends of groove to prevent vinyl from sliding out
of groove. From inside of shower, set drip bar on bottom rail and adjust so
approximately 1/8” daylight space remains between bottom of vinyl and damstrip
(L). Mark with pencil; peel off tape and press drip bar to door on marked
position.
You only get one chance
.
I
1133 S. McCord Rd. P.O. Box 508
Holland, OH 43528
