MESH AND SOLID SAFETY COVER INSTALLATION GUIDE
Care and Maintenance
Cover must always stretch taut across the pool.
After the initial installation, some stretching
may occur.
Each spring should be compressed 50%, if needed
readjust straps.
Water level in pool can not go below 18” from top,
as cover is designed to set down on water with the
weight of snow and ice. Without proper water level,
the cover will stretch too far, placing undue strain
on cover and voiding the warranty.
Mesh covers are designed to screen out leaves and
large debris. Dust, dirt and other small debris will
fi lter through cover into pool. Algae will also form
under mesh cover without proper chlorinization
and winterization. Solid covers with mesh panel
keep most debris out of pool. Solid covers without
mesh drain must have automatic pump on cover
and pluged in at all times.
Store the cover in supplied mesh bag when not in
use and store off ground to keep mice and other
animals from getting to the cover.
Page
5
of 5
60 Campanelli Dr., Braintree, MA 02184 www.splashsupercenter.com