TwinTube Analog Code
®
Plug-in
7
Control Elements
Mouse Wheel Control
All SPL Analog Code plug-ins support mouse wheel control for
rotary controls and faders. Place the mouse cursor over a rotary
control or fader and move the wheel or scroll ball of your mouse
to adjust the control or fader. Hold the CTRL (Windows) or APPLE/
COMMAND key while moving the wheel or scroll ball for fine adjust-
ments with higher control resolution.
Power LED
With a click on the POWER LED you can turn the
TwinTube on or off. The switch settings of HAR. ON and
SAT. ON are stored so that the previous state is recalled when the
TwinTube is activated with the POWER LED switch function. The
POWER LED is illuminated when the plug-in is activated.
HAR. ON/SAT. ON
Activating HAR. ON engages the HARMONICS control.
Likewise you engage SATURATION with the switch SAT. ON. When
turned on, these switches illuminate. One of the both processing
stages can be applied therefore respectively separately. Similarly
you can process the signal with both stages at the same time.
HARMONICS Control
With the HARMONICS Control you can adjust the over-
tone processing intensity. The level range of a chosen
center frequency (see “HARMONICS Switches” on page
8) lies between 0 and 15 dB. Overtones are marked
also as “Harmonics”. The HARMONICS control results in an enrich-
ment of the overtone range for a chosen fundamental tone (see
“Introduction” on page 5 and 6). The tonal result is an intensifica-
tion of the presence that produces a fresher, silky and more brilliant
aural image. Similarly, the signal’s spatial qualities gain intensity.
