1.Check infra
-
red eye for dirt
or damage. Use plastic
lenses cleaning solution and
a soft cloth. Dry lens with a
soft cloth.
2. Make sure that the
sensor is not getting a
reflection from another
object.
3. After electricity has been
applied to the dryer it should
turn on within a few seconds.
Test by placing hands 7
-
15cm below the nozzle.
4. Replace circuit boards.
Dryer will not shut
off or run for 20
seconds, then will
not re
-
start.
For repair parts, visit
www.splwashrooms.co.nz
Please supply following
information:
-
Model number
-
Serial number
-
Part description as shown in
parts list
Trouble shooting Chart
Symptom Possible Cause(s) Corrective Action
Dryer fails to start.
A. No power to Unit.
B. Defective Motor.
Check power to
unit and
connections.
Replace Motor.
Sensor is dirty,
defective or there
is a reflection.
