Phonitor e – Quickstart
Phonitor e – Quickstart
2
3
Phonitor e
Serial
Number
Voltage Selection:
1. Remove Fuse Holder
2. Exchange Fuses
3. Flip Over
4. Reinstall
Fuses:
230 V: T 500 mA L 250V
115 V: T 1 A L 250V
~115 V AC/~230 V AC,
50 Hz/60 Hz, P max. 30 W
Made in Germany
ON BOTTOM SIDE:
DIP SWITCHES 1 ON: 22dBu
2 ON: RCA -10dBV to 0dBu
RISK OF ELECTRIC SHOCK
D O N O T O P E N
C A U T I O N
RISQUE DE CHOC ÉLECTRIQUE
N E PA S O U V R I R
AT T E N T I O N
ANALOG SOURCES
DIGITAL SOURCES
L
R
USB
OPTICAL
COAX
PGM
VO
LU
M
E
Refer to
Manual
IR
Pin 2 +
L
R
VOLTAiR
120V DC Audio Rail
SOURCE
Digital
RCA
XLR
DIGITAL
Coaxial
Balanced
IR
Standard
Optical
USB
Phonitor e
Headphone Amplifier
C1
C2
Off
MATRIX
VOLUME
ON
Start up
Read the security advices on page 9!
Make sure that the selected mains voltage of the Phonitor e is according to the
mains voltage of your region.
Make sure that the mains switch on the rear of the Phonitor e is set to Off
(Off = O / ON = I).
The standby switch on the front panel has to be set to .
Connect the supplied power cord to the Phonitor e and an appropriate mains
socket outlet.
If the supplied power cord does not match your mains socket outlet, please contact your dealer.
Turn off all devices you wish to connect to the Phonitor e.
Connect the outputs of your analog sources (e.g. CD Player, Director, Phonos) to
the analog inputs of the Phonitor e. Please use appropriate audio cables (XLR,
RCA).
Audio cables not included in the scope of delivery.
If the DA converter option is fitted connect the outputs of your digital sources
(e.g. Mac, PC or CD Player) to the digital inputs of the Phonitor e. Please use
appropiate audio cables (USB, coaxial, optical).
Digital audio cables not included in the scope of delivery.
For Windows
®
computers download the latest driver from phonitore.spl.info under the “Driver” tab and have it
installed. Macs, iPhones and iPads do not require a driver since the USB port is Apple-Class compliant.
Connect your headphone to the balanced or standard headphone output of the
Phonitor e.
To protect the headphone power amplifier stage and guarantee a long and consistent performance please note:
• Turn down VOLUME before swapping headphones.
• Never insert a mono jack plug into the front panel stereo jack.
• Make sure that the headphones stereo jack is fully inserted.
• If you use an adapter from 3,5 mm to 1/4
"
(6,35 mm) on your headphone make sure that the adapter is fully
screwed on respectively fully plugged in.
1
2
3
4
5
6
7
8
10
Analog Audio Inputs
Digital Audio Inputs
Balanced Headphone Output
Standby Switch
Standard Headphone Output
optional
Mains Voltage
Mains Switch
Mains Connector
7
8
10
4
10
2
3
EN
DE
5
