Phonitor
13
Voltage
The rear panel voltage selector switch serves to let the user switch to
the local line voltage standard.
IMPORTANT ADVICE: Before you use the Phonitor, make
sure that this switch setting reflects the correct local power
line voltage (115 V position: 110-120 volts/6o Hz, 230 V
position: 220-240 volts/50 Hz).
Power Connection
Connect the included power cord to the rear Mains Input. Transformer,
power cord and case connection conform to VDE, UL and CSA require-
ments. Power fuse ratings are 500 mA slow blow (220-240 volts) or 1 A
slow blow (110-120 volts).
Power
The rear panel Power switch activates the unit, confirmed by the light-
ed VU meters.
IMPORTANT ADVICE: Switch on the unit only after you have
turned the Volume control fully left, and wait to set your de-
sired volume level until the unit is powered on. Neglecting
this can damage either or both your ears and your headphones!
XLR Connections
Switch off the unit before you begin the process of making the first
or any subsequent connections (rear panel Power switch). Neglecting
this can damage either or both your ears and your headphones!
Connect the monitoring signal to the left and right channel XLR input
sockets. Both XLR outputs transmit the monitoring signal unaltered
so that no additional monitoring output is needed for insertion of the
Phonitor. Input and output stages are electronically balanced. They
ensure high common mode rejection and drive long cable connections
(depending on cable capacities and following input stages).
Rear Panel/Connections
Connections & Switches
