8
Marc One
Installation Instructions
External Switching Power Supply
Installation
• Before attaching the DC plug of an adapter to equipment, please unplug the adapter
from the AC power and verify the unit is within the voltage and current rating on the
equipment.
• Keep the linkage between the adapter and its power cord tightly as well as connecting
the DC plug to equipment properly.
• Protect the power cord from being trodden on or being squashed.
• Keep good ventilation for the unit in use to prevent it from overheating. Also a 10-15 cm
clearance must be kept when the adjacent device is a heat source.
• An approved power cord should greater or equal to SVT, 3G×18AWG or H03VV-F,
3G×0.75mm .
• If the final equipment is not used for long period of time, disconnect the equipment
from power supply to avoid being damaged by voltage peaks or lightning strike.
• For other information about the products, please refer to www.meanwell.com for details.
Warning / Caution !!
• Risk of electrical shock and energy hazard. All failure should be examined by a qualified
technician. Please do not remove the case of the adapter by yourself!
• Risk of fire or electrical shock. The openings should be protected from foreign objects or
dripping liquids.
• Using wrong DC plug or forcing a DC plug into an electronic device may damage the de-
vice or cause to malfunction. Please refer to DC plug compatibility information shown in
specification sheets.
• Adapters should be placed on a reliable surface. A drop or fall could cause damage.
• Please do not put adapters in places with high moisture or near the water.
• Please do not put adapters in places with high ambient temperature or near fire source.
About the maximum ambient temperature, please refer to their specifications.
• Output current and output wattage must not exceed the rated values on specifications.
• Disconnect the unit from the AC power before cleaning. Do not use any liquid or aerosol
cleaner. Only use a damp cloth to wipe it.
• Warning:
• For equipments that are using accompany with BSMI certified adapters, the enclo-
sure of surrounding equipments shall comply with V1 of above flammability capabil-
ity.
• Operation of this equipment in a residential environment could cause radio interfer-
ence.
• Please contact your local qualified recyclers when you want to dispose this product.
• This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may
cause undesired operation.
