SPL Kicker Pro D2518 Owner'S Manual Download Page 4

Page: 4 / 8

5 - P i e c e

D r u m S e t O w n e r ’ s M a n u a l

kicker

Pro

1. Place black bass drum head with the SPL logo on

front of the bass drum shell.

2. Place bass drum hoop onto drum head.
3. Insert long tension rod / washer / bass drum claw

hook assembly into bass drum lug. Make sure claw
hook is secure on the bass drum hoop. Tighten
with your fingers.

4. Repeat this for all the lugs on one side of the drum.
5. After all tension rods on one side are finger tight,

use the drum key to tighten the #1 tension rod 3
turns. Follow these steps for tension rods #2 through
#8 in a criss-cross pattern as shown. Repeat this
pattern, tightening each rod one half turn until the
drum head is taut and wrinkle free.

6. Repeat for the clear batter head on the opposite

side of the drum.

Bass Drum Head Assembly

Washer

Bass Drum Hoop

Bass Drum Claw

Long Tension Rod

Shell

Bass Drum Lug

FRONT - Audience Side

Bass Drum Leg Assembly (Spurs)

1.  Loosen key screw on spur bracket.
2.  Insert drum spur.
3.  Tighten key screw on spur bracket.

Spur Bracket

Key Screw

Tom Head Assembly

Drum Key

Washer

Hoop

Short Tension Rod

Shell

Lug

1. Place head on top of the drum shell.
2. Place metal hoop onto drum head, aligning the

holes in hoop with the drum lugs.

3. Insert short tension rods with metal washer through

the holes in the hoop.

4. Thread the tension rod into the lug and finger tighten.
5. Repeat with the rest of the tension rods for the top

of the drum. Using the drum key, gradually tighten
each tension rod in equal amounts using the same
criss-cross pattern as done on the bass drum until
the head is taut and wrinkle free.

6. Repeat for the bottom head.

Assembly Instructions

Drum Spur