H y d r a u l i c D r i l l
2 3 0 5 5 0 0 1 0
M a s c h i n e n f a b r i k G m b H
Spitznas Maschinenfabrik GmbH, Fellerstr.4, D-42555 Velbert, Tel: +49(0)2052 605 0, Fax: +49(0)2052 605 29
, www.spitznas.de
Translation of the original manual,
compiled: 14.02.11
230550010_en_Version_01
Page 3 of 16
SAFETY INSTRUCTIONS
ATTENION: Your own safety and the safety of the people near by depend on the careful and
appropriate operation of the drill. Before using it, make yourself familiar with the operation of the
drill and remove unnecessary people from the work area. Read all operation and maintenance
instructions before starting the operation. The drill is designed for special applications only.
We therefore thoroughly recommend not modifying and/ or using it for improper applications.
Before operating the drill, make yourself familiar with the following safety instructions:
1.
Keep the work area clean and uncluttered.
2.
Keep children away from the drill or the work area.
3.
Proper Clothing
Do not wear clothes, which are too tight or too loose. This can constrain your movement,
resp. can be caught by the drill. This applies for jewellery as well.
4.
Protect your head and hear, eyes and ears, hands and feet.
Wear a helmet, goggles and ear protection. Protect your hands with non-slipping gloves.
Safety shoes protect your feet. Disconnect the machine from the main supply after finishing
the work (avoidance of unexpected starting in uncontrolled condition).
5.
Switch off the machine before laying it aside (shut valve). Disconnect machine from
power supply after finishing the work (avoid unintentional starting).
6.
Stay alert
Fatigue leads to carelessness and accidents. Never work under the influence of alcohol,
drugs or stronger medication.
7.
Safe working
If the drill rod jams, the torque rises immediately. Always be prepared fort his and hold the
handles tight. Ensure safe foothold and good balance.
The machine is operated by hand and stops at a torque of approx. 40- 45 Nm.
8.
Avoid unintended starting
Never carry the drill with the motor running.
9.
Follow the general current and appropriate Accident Prevention and Safety
Procedures.
10.
Storage
At longer down times (a few days) rinse the motor with hydraulic oil.
