17
1. If hot water is required, press the burner start
button (I).
2. Turn the temperature adjustment knob to achieve
desire cleaning temperature.
3. After hot water use, press burner stop button (0).
This will turn OFF the hot water and change back
to cold water mode for cleaning.
1. Fill the detergent tank with cleaning solution. Only use
a cleaning detergent approved by the manufacturer
and do not use under any circumstance acid or
corrosive products (contact an authorized service
agent or the manufacturer if in doubt).
2. If detergent is required it
CAN BE USED IN LOW
PRESSURE ONLY
.
3. Open the chemical injector by turning the knob
anti-clockwise until the desired affect is reached.
When the trigger is pulled, water mixed with
detergent will be sprayed.
4. Never allow sprayed detergent to dry on the
cleaning surface, as this may damage the
surface.
USING CLEANING AGENT
HOT WATER MODE