To maintain this unit in peak working condition during its operating life it is necessary to carry out regular
maintenance operations and replace worn or broken parts immediately upon their failure. We strongly advise
that all maintenance is carried out by an authorized JETFIRE agent using original spare parts.
Failure to follow the maintenance guidelines in this booklet releases the manufacturer from
any responsibility in reference to injuries and damages to both persons and goods.
This also may render any warranty given with the unit void.
General
1 Power cable (Each use)
- Check the power cable / plug for any cuts, abrasions or damage before each use. If damage is
found it must be replaced immediately (Not repaired) by an authorized service
person / electrician.
2 Fuel connections (Each use)
- Check fuel fittings and connections for leaks.
3 Performance (Each use)
- Check machine functionality to ensure it is operating as normal.
- Check the units performance characteristics as specified in technical data.
Should any issue be found contact an authorized JETFIRE agent immediately for repair.
Note
ALWAYS ISOLATE UNIT FROM THE ELECTRICAL SUPPLY BEFORE ATTEMPTING ANY REPAIRS
OR MAINTENANCE.
Replacing Pump Fuel Filter. (Figure K)
1 Unscrew(C.W) Filter bottom from Filter top with adjustable pliers. (Figure J)
2 Remove Filter from Filter top
3 Wash Filter in clean kerosene and Remove Dirt.
4 Put Filter back in Filter Top. and Tighten Filter bottom firmly.
5 Reinstall Back Cover.
Replacing Fuel Filter in Fuel Tank. (Figure J)
1 Pull fuel line off from Fuel Filter neck
2 Carefully Pull fuel filter off from Fuel tank with hand or flat blade screwdriver.
3 Wash Filter with clean Kerosene and replace in tank and attach fuel line to fuel filter neck.
Figure J
Figure K
MAINTENANCE INSTRUCTIONS
AND TROUBLESHOOTING
MAINTENANCE INSTRUCTIONS
