Spitwater HP12110E GT Operating And Maintenance Manual Download Page 8

 

 8 

 
 

All health and safety regulations applicable to general safe work practices, as well as safe operation of 
equipment, as well as any specific standard for safe operation of high pressure cleaners according to local 
regulations must be followed. When operating this unit, 

 

1.  PERSONAL SAFETY

 

  Personal protective equipment (PPE) must be worn when 

operating this unit including footwear, clothing, eyewear and 
all other necessary equipment according to regulations and 
requirements. 

  Always wear appropriate ear protection if the noise level 

indicated in the technical data of this appliance exceeds 
80dB (A). 

  When operating the unit be alert and hold onto the gun and 

lance firmly with both hands. 

  When the gun is operated, the user is subject to very strong 

recoil forces and torque. 

 

 

 

 

 

  There is a risk of high pressure water jet injury. Never aim 

the jet at yourself, other people or animals as this could 
result in serious injuries or even death. 

  There is a risk of electrocution. Never aim the water jet at the 

unit itself or other live electrical equipment as this could 
result in serious injury or even death. 

  Depending on the application of high pressure cleaners, 

hydrous aerosols may be formed. The employer / user shall 
perform a risk assessment in order to specify the necessary 
protective measures regarding aerosols, depending on the 
surface to be cleaned and its environment. Shielded nozzles 
can be used for high pressure cleaning, which will reduce 
the emission of hydrous aerosols dramatically

 OR 

respiratory masks of class FFP 2, an equivalent or 
higher are suitable for the protection against hydrous 
aerosols.

 

 

 

 

 

OPERATIONAL SAFETY PRECAUTIONS 

 

 

 

 

 

 

Summary of Contents for HP12110E GT






















Reviews: