16
1. To activate high pressure turn the lance handle
clockwise and pull the trigger and to activate low
pressure turn the lane handle anti-clockwise.
1. Fill the detergent tank with cleaning solution. Only
use a cleaning detergent approved by the
manufacturer and do not use under any
circumstance acid or corrosive products (contact an
authorized service agent or the manufacturer if in
doubt).
2. If detergent is required it
CAN BE USED IN LOW
PRESSURE ONLY
. To activate low pressure turn
the lance handle anti-clockwise and pull the trigger.
Turn back the handle clockwise to switch OFF low
pressure and chemical.
3. Open the chemical injector by turning the knob
anti-clockwise until the desired affect is
reached. When the trigger is pulled, water
mixed with detergent will be sprayed.
USING CLEANING AGENT
USAGE TIPS:
•
Use the unit as necessary to carry out cleaning
while trying to minimize where possible opening
and closing the spray gun trigger as this will
lead to premature wear of the parts.
•
Do not hold the nozzle too close to the surface
to be cleaned as this may damage the nozzle.
Start cleaning at a comfortable distance and
work closer as necessary.
PRESSURE ADJUSTMENT HIGH / LOW
HIGH
LOW
