12
FUNCTIONS
STEP 3: To slow tread-belt press and hold the Slow key (console or hand rail) to the desired speed.
You may also press the rapid speed adjust keys, 2 through 12.
STEP 4: To stop the tread-belt press and release red Stop key.
Pause/Stop/Reset Feature
STEP 1: When the treadmill is running the pause feature may be utilized by pressing the red Stop key
once. This will slowly decelerate the tread-belt to a stop. The incline will go to zero percent. The
Time, Distance and Calorie readings will hold while the unit is in the pause mode. After 5 minutes the
display will reset and return to the start up screen.
STEP 2: To resume your exercise, when in Pause mode, press the Start key. The speed and incline
will return to their previous settings.
Pause is executed when the Stop button is pressed once. If the Stop key is pressed a second time,
the program will end and a workout summary will be displayed. If the Stop button is pressed a
third time, the console will return to the idle mode (start up) screen. If the Stop button is held
down for more than 3 seconds the console will reset.
Incline Feature
Incline may be adjusted anytime after belt movement.
Press and hold the Adjust
▲▼
keys (console or hand rail) to achieve desired level of effort. You
may also choose a more rapid increase / decrease by selecting desired key, 2 through 12, on left
hand side of console (incline).
The display will indicate incline percent as adjustments are made.
Incline will remain in it’s position when display is turned off.
Dot Matrix Center Display (Manual Operation)
Twenty rows of Tri-color “dots”(8 high) indicate each segment of a workout. The dots are only to
show an approximate level (speed/incline) of effort. They do not necessarily indicate a specific value -
only an approximate percent to compare levels of intensity. In Manual Operation the Speed / Incline
dot matrix window will build a profile “picture” as values are changed during a workout.
Next to the Dot Matrix window are three LEDs labeled: Track, Speed and Incline, along with a
Display button. When the Track LED is lit the Dot matrix displays the Track profile, when the Speed
LED is lit the Dot matrix displays the Speed profile and when the Incline LED is lit the Dot Matrix
displays the Incline profile. You may change the Dot Matrix profile view by pressing the Display
button. After scrolling through the three profiles, by pressing the Display button, the Dot matrix will
automatically scroll through the three displays showing each one for four seconds. The LED
associated with each profile will blink while that view is displayed. One more press of the Display
button will return you to the Track profile.
