ON
SENSOR
OFF / TRY ME
ADAPTER
INPUT: 6V
1000mA
TRY ME
VOLUME
-
+
ON
SENSOR
OFF / TRY ME
ADAPTER
INPUT: 6V
1000mA
TRY ME
VOLUME
-
+
ON
SENSOR
OFF / TRY ME
ADAPTER
INPUT: 6V
1000mA
TRY ME
VOLUME
-
+
ON
SENSOR
OFF / TRY ME
ADAPTER
INPUT: 6V
1000mA
TRY ME
VOLUME
-
+
ON
SENSOR
OFF / TRY ME
ADAPTER
INPUT: 6V
1000mA
TRY ME
VOLUME
-
+
ON
SENSOR
OFF / TRY ME
ADAPTER
INPUT: 6V
1000mA
TRY ME
VOLUME
-
+
ON
SENSOR
OFF / TRY ME
ADAPTER
INPUT: 6V
1000mA
TRY ME
VOLUME
-
+
ON
SENSOR
OFF / TRY ME
ADAPTER
INPUT: 6V
1000mA
TRY ME
VOLUME
-
+
ON
SENSOR
OFF / TRY ME
ADAPTER
INPUT: 6V
1000mA
TRY ME
VOLUME
-
+
ON
SENSOR
OFF / TRY ME
ADAPTER
INPUT: 6V
1000mA
TRY ME
VOLUME
-
+
STEP 3
Now place (E) Torso Frame onto the tops of (B) Support Poles as shown and secure by aligning the
quick-connect push buttons into the pre-drilled hole. Note: the Speaker should be facing towards
the front.
Lower the (F) Hip Ring over the (E) Torso Frame and attach through the slots located in the sides
at the bottom of the (F) torso Frame as shown.
Now plug the UL Power Adapter into the input receiving jack marked “DC 6V” on the Function
Control box and route the power cord down towards the bottom of the frame.
OPTIONAL: If you choose to use Spirit’s Step Here Foot pad (sold separately), plug the connector
into the input receiving jack marked “TRY ME” on the Function Control box and route the Step
Here pad down and out the (D) Pants and out through the bottom of the (C) Shoe, then set the Step
Here pad in front of the character.
STEP 4
Place the (G) Shoulder Frame on to the (E) Torso Frame as shown. Then lower (H) Shirt over the
(E) torso frame as shown.
STEP 5
Now slide the (I) Left Arm up through the left sleeve and slide the forked-hook into the left slot
housing on the (E) Torso Frame. Slide the (J) Right Arm up through the right sleeve and slide the
forked-hook into the right slot housing on the (E) Torso Frame. Set the (K) Left Hand into place by
sliding the forked-hook into the “wrist” slot housing on the end of the arm. Set the (L) Right Hand
with Hammer into place by sliding the forked-hook into the “wrist” slot housing on the end of the
arm.
PROCEED TO PAGE 3 > >
2/3
STEP 6
Place the (M) Head into the (E) Torso Frame by sliding the forked-hook into “neck” slot housing on
the top of (E) Torso Frame then attach the cable from the (M) Head to the power box as shown.
L
E
E
K
F
J
I
E
E
E
E
G
G
H
F
F
B
B
ON
SENSOR
OFF / TRY ME
ADAPTER
INPUT: 6V
1000mA
TRY ME
VOLUME
-
+
ON
SENSOR
OFF / TRY ME
ADAPTER
INPUT: 6V
1000mA
TRY ME
VOLUME
-
+
STEP
HERE
UL
ADAPTER
E
x 2
x 2
ON
SENSOR
OFF / TRY ME
ADAPTER
INPUT: 6V
1000mA
TRY ME
VOLUME
-
+
ON
SENSOR
OFF / TRY ME
ADAPTER
INPUT: 6V
1000mA
TRY ME
VOLUME
-
+
