XT175 / XT275
4
WARNING!
●
NEVER
use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Large
switching currents of the drive motor will trip GFCI type outlets, as will any appliance with a
large motor. Route the power cord away from any moving part of the treadmill including the
elevation mechanism and transport wheels.
●
NEVER
remove any cover without first disconnecting AC power.
●
If voltage varies by ten percent (10%) or more, the performance of your treadmill may be
affected.
Such conditions are not covered under your warranty.
If you suspect the voltage
is low, contact your local power company or a licensed electrician for proper testing. See
Diagnosis Guide, page 27.
●
NEVER
expose this treadmill to rain or moisture. This product is
NOT
designed for use
outdoors, near a pool or spa, or in any other high humidity environment. The temperature
specification is 4 to 48 degrees Celsius, and humidity limit is 95%, non-condensing (no water
drops forming on surfaces).
This product must be grounded.
If the treadmill should malfunction or breakdown, grounding
provides a path of least resistance for electric current, reducing the risk of electric shock. This
product is equipped with a cord having an equipment-grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and grounded in accordance with
all local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a
risk of electric shock. Check with a qualified electrician or serviceman if you are in
doubt as to whether the product is properly grounded. Do not modify the plug provided
with the product if it will not fit the outlet; have a proper outlet installed by a qualified
electrician.
This product is for use on a nominal 240-volt circuit, and has a grounding plug that looks like
the plug illustrated below. A temporary adapter that looks like the adapter illustrated below
may be used to connect this plug to a 2-pole receptacle as shown below
if a properly grounded
outlet is not available. The temporary adapter should be used only until a properly grounded
outlet, (below) can be installed by a qualified electrician. The green colored rigid ear-lug, or the
like, extending from the adapter, must be connected to a permanent ground such as a properly
grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal
screw.
Important Electrical Information
Grounding Instructions
Grounded Outlet
Grounding Pin
Grounded Outlet Box
Metal Screw
Adapter
Tab of
Grounding
Screw
