background image

4/7

STEP PAD 

INPUT

OPTIONAL STEP PAD SETUP

OPTIONAL EXTERNAL SPEAKER SETUP

27

28

29

30

Follow steps 1 through 8 on the 
installation instructions first, 
then:
27. Connect the wire from the 
optional Step Pad or Try Me Button 
to the jack labeled “TRY ME” on the 
Function Control Box as shown in 
Figure 27. 

28. Step on the Step Pad or Try 
Me Button to activate the prop  
as shown in Figure 28. 
Step Pads (SKU #01181288) and 
Try Me Button (SKU #01405943) 
are sold separately and can be 
purchased in-store and online at 
www.SpiritHalloween.com

29. This prop's sound can be 
played through an external 
speaker (sold separately). To use 
this feature, follow steps 1 
through 8 on the installation 
instructions first, then: 1. Connect 
the wire from your external 
speaker to the jack labeled 
“SPEAKER” on the Function 
Control Box as shown in Figure 29. 

30. Adjust the volume level to 
your preference as shown in 
Figure 30. 

Note: Use external speakers with 
an impedance of 8 ohms only.

VOLUME

CONTROL

EXTERNAL

SPEAKER

JACK

IMPORTANT INFORMATION: 

 FOG MACHINE ADAPTER INSTRUCTION:

1. The infrared sensor distance and ambient temperature are directly related.  When the body temperature (98.6° F) is different to the ambient 
air temperature, the infrared sensor distance will be farther. When the body emperature (98.6° F)  is close to the ambient air temperature, the 
infrared sensor distance will be shorter.

2. Do not use this item in an environment where air currents are caused by a window, air conditioning, or air outlet.

3. Do not have the infrared sensor face a direct source of heat such as a heater.

E

Q

N

       •  Use the (N) Fog Machine Adapter only with SVI 400 Watt Fog Machine (sold separately).
       •  Connect the 3-prong plug of the (N) Fog Machine Adapter into the jack at the back of the Fog Machine.
       •  Connect the power cord of the Fog Machine into a power outlet.
       •  Turn the power switch of the Fog Machine to the “ON” position.
       •  After the Fog Machine warms up (approx. 5 minutes), the light on the (N) Fog Machine Adapter will turn on.
       •  Press the “ON” switch, the fog machine will be ready to produce fog.
       •  Press the “OFF” switch, the fog machine will not produce fog.
       •  Be sure to follow all safety precautions included with the Fog Machine during operation.

OPTIONAL FOG MACHINE SETUP

OPTIONAL ACCESSORIES SOLD SEPARATELY

23

24

25

26

Plug the long cord available 
from the Function Control Box 
into the (N) Fog Machine 
Adapter. Then plug the (N) Fog 
Machine Adapter into the fog 
machine as shown in Figure 25. 
Plug the fog machine into an AC 
outlet and turn ON. Allow 
several minutes for the fog 
machine to preheat. 

This item can also connect to an 
optional fog machine (sold sepa-
rately). Follow Steps 1 through 22 
on the installation instructions first, 
then: Thread the (O) Long Fog 
Hose down through the (T) Pants 
and attach the (O) Long Fog Hose 
to the (P) Moisture Trap Tank. 
Then attach the (Q) Fog Hose to 
the other side of the (P) Moisture 
Trap Tank. Connect the cable 
available from the Function Control 
Box into the (N) Fog Machine 
Adapter as shown in Figure 23. 

Attach the other end of the (Q) 
Fog Hose to the fog machine as 
shown in Figure 24.

NOTE: If the connector does not 
fit, remove the inner adapter 
ring and re-connect to the 
nozzle of Fog Machine.

The fog hose attachment is 
compatible with 400 Watt 
(SKU #00567230) and the 1,000 
Watt (SKU #01027507) Fog 
Machines. Fog Machines, Timers 
(SKU #00190967), and Remotes 
(SKU # 01104116) are sold 
separately and can be purchased 
in-store and online at 
www.SpiritHalloween.com

Adapter

Fog Hose Connector

O

P

Q

N

E

Summary of Contents for NOZZLES THE CLOWN








Reviews: