Model XE860
Work Assembling/Disassembling
Part
9 Drive Pulley
Rev
Procedures
：
1. Follow procedures 2, 3, 4, 5 and
6 to take apart Connecting Arm,
Pedal Arm, both Chain Covers,
Cross Bar and the Belt.
2. Use C-ring pliers to release 2pcs
of
ψ
25 C-rings on Crank Axle
to release Crank Axle together
with Drive Pulley, as shown in
figures 1 and 2. Use a hammer if
necessary.
3. To separate Drive Pulley from
the Crank Axle, use C-ring pliers
to release
ψ
25 C-ring and use
two 11 mm wrenches to release
4pcs of 1/4" x 3/4" hex head bolt
and 1/4" nuts, as shown in figure
3.
4. To resume Drive Pulley, return
one C-ring back on the Crank
Axle and put it back on the Main
Frame then secure with
remaining C-rings.
5. Follow procedures 6, 5, 4, 3 and
2 to return other parts.
1
2
3