Customer Service 1-888-707-1880
Dyaco Canada Inc. 2016
Email: [email protected]
16
CALORIE DISPLAY
Displays the cumulative calories burned at any given time during your workout.
Note
:
This is only a rough guide used for comparison of different exercise sessions, and is not to be
used for medical purposes.
SPEAKERS
The console has built-in Speakers and an audio input jack. There is no volume control on the
console. The volume must be controlled on the Audio Source.
QUICK START
1. Press and release the
Start
key to wake display up (if not already on).
Note
: Installing the tether key will also wake up the console.
2. Press and release the
Start
key to begin belt movement, at .5MPH, then adjust to the
desired speed using the
Speed + /
– or Fast/Slow keys
(console or hand rail). You may
also use the
quick speed key
, then 0 through 9 to adjust the speed.
3. To slow the tread-
belt press and hold the “–” key (console or hand rail) to the desired
speed. You may also press the quick speed adjust keys, 0 through 9.
4. To adjust the Incline level, pressed and hold the
I /
– or Up/Down keys;
you may
also adjust to the desired incline by pressing the
Quick Incline key
and then 0 through 9.
5. To stop the tread-belt press and release the
Stop
key.
PAUSE/STOP/RESET/FEATURE
1. When the treadmill is running the pause feature may be utilized by pressing the
Stop
key
once. This will slowly decelerate the tread-belt to a stop. The incline will go to zero percent.
The Time, Distance and Calorie readings will hold while the unit is in the pause mode. After
5 minutes the display will reset and return to the start up screen.
2. To resume your exercise, when in Pause mode, press the
Start
key. The speed and incline
will return to their previous settings.
• Pause is executed when the
Stop
button is pressed once. If the
Stop
key is pressed a second time, the program
will end and a workout summary will be displayed. If the Stop button is pressed a third time, the console will return
to the idle mode (start up) screen. If the
Stop
button is held down for more than 3 seconds the console will reset.
INCLINE FEATURE
• Incline may be adjusted any time after belt movement.
• Press and hold the
I /
– or Up/Down keys
(console or hand rail) to achieve desired
level of effort. You may also choose a more rapid increase/decrease by selecting the
Quick
Incline key
, then 0 through 9.
• The display will indicate incline percent in increments of .5 as adjustments are made.
• The incline will return to zero unless the main power switch or safety key are turned off while
incline is at a higher setting.
HANDRAIL BUTTONS DISABLE SWITCH
To the right of the Enter button there is a Handrail control switch and an indicator light next to it
when the indicator light is lit, the handrail switches are disabled. This allows you to use the full
length of the handrails without fear of activating the speed or elevation controls.