Customer service: 1-888-707-1880
Dyaco Canada Inc 2020
Email: [email protected]
5
ST800DR3 ASSEMBLY INSTRUCTIONS
To avoid possible damage to this ST800DR3 Dumbbell Rack, please follow these assembly steps in the
correct order. Be sure to read your Assembly/Owner’s Guide before using your new ST800DR3
Dumbbell Rack.
Please use the various lists in this manual to account for all parts included in the assembly. If
replacement parts are needed, use the part number and the description from the lists. Use only our
replacements when servicing. Failure to do so will void your warranty and could result in personal injury
After assembly, check all operations for ease of use. If any problems are experienced, first recheck the
assembly instructions for possible errors made. If more help is needed, call your authorized dealer. Be
sure to have your serial number ready.
NOTE: During assembly, it is recommended to ensure that all bolts are in place and partially
threaded before completely tightening any one bolt.
UNPACKING
Cut the straps, then pull the staples away from the bottom half and lift the top half of the carton off of the bottom
The hardware is located in the holes of the associated tubes/brackets
ST800DR3
TOOLS REQUIRED / HARDWARE GUIDE
RATCHET WRENCH
AND SOCKET
ADJUSTABLE WRENCH
RUBBER MALLET
HEX KEY
WRENCH SET
