IM-P337-73
EMM Issue 2
1
ILVA20 and MVT10 system
© Copyright 2019
Printed in GB
1. Rotating the electronics enclosure
Rotating the display
The electronics housing can be rotated through 360 degrees by releasing the 3 grub screws and turning the
white housing. The display can be rotated t/-180 degrees. Do not rotate more then 360 degrees.
To rotate the electronics display, first disconnect the power supply to the MVT10. Unscrew the front
housing screw cap (with glass). Unscrew the three display retaining screws and rotate the complete display
cassette to the required position. Refit the retaining screws and front housing screw cap.
Caution:
Do not unplug the cables from the display
cassette and ensure that the cables are not
strained or trapped whilst carrying out this
procedure.
Caution:
Electrostatic discharge (ESD) procedures
should be followed whilst rotating the display.
3374450/2
ILVA20 and MVT10 System
Essential Installation Guide
IM-P337-73
EMM Issue 2
This guide must be read in conjunction with the Installation and Maintenance
Instructions (IM-P337-69) supplied with product.
This guide highlights the minimum installation requirements to ensure that the
product performs to user expectations.
The ILVA20 and MVT10 are a calibrated pair.
Ensure the correct MVT10 is fitted to the correct ILVA20.
Fixing screws
Fig. 1
© Copyright 2021
Printed in GB
