IM-IBR16-32IN
Issue 1
5
1.14 Freezing
Provision must be made to protect products which are not self-draining against
frost damage in environments where they may be exposed to temperatures below
freezing point.
1.15 Disposal
Unless otherwise stated in the Installation and Maintenance Instructions, this
product is recyclable and no ecological hazard is anticipated with its disposal
providing due care is taken.
1.16 Returning products
Customers and stockists are reminded that under EC Health, Safety and
Environment Law, when returning products to Spirax Sarco they must provide
information on any hazards and the precautions to be taken due to contamination
residues or mechanical damage which may present a health, safety or environmental
risk. This information must be provided in writing including Health and Safety data
sheets relating to any substances identified as hazardous or potentially hazardous.
1.17 Safe lifting of Spirax Sarco products
Please note that the Spirax Sarco model FTC80 comes complete with tapped holes
located in the cover, which may be used for lifting purposes at the sole risk and
responsibility of the purchaser.
The purchaser is responsible for the selection and use of the correct eye-bolt or
shackle combination and is, in whole, responsible for all lifting operations and
operator competency at their location. Spirax Sarco will ensure that any tapped hole
will have a spot face larger than the shoulder of a standard eye-bolt to allow seating
down to the shoulder. However, it should not be assumed that an eye-bolt is suitable
for lifting the product simply on the basis of shoulder size.
Spirax Sarco will accept no responsibility for loss or damage real or imagined,
caused by incorrect or inappropriate lifting of our products.
Spirax Sarco will ensure that the tapped holes provided are clearly marked with the
exact size and thread form. We will also carry out in conjunction with a third party,
a test on a sample of each product so provided and make available a copy of the
test procedure and test certificate on request.
Furthermore and without obligation Spirax Sarco will attach to each product
provided with such holes, threaded or otherwise, a disclaimer affixed to the product
explaining the purchaser's duty under the LOLER regulations for safe off loading
and lifting of the product at their premises.
