2011-09-18
SPINTSO WATCH INSTRUCTION
Model
：
SPINTSO Watch. SPINTSO INTERNATIONAL Ltd, SWEDEN. www.spintso.com Page: 6/6
4. Stopwatch mode
The display range of stopwatch is 0 ~ 99 hours, 59 minutes, 59.99 seconds. The stopwatch will stop
counting automatically when the stopwatch is up to its limit.
To measure time with stopwatch: In Stopwatch Mode, presses D to start / stop. When stopped, press C
for 3 seconds to clear the date to zero. The data will flash in 3 seconds when is going to clear.
To measure LAP time with stopwatch
(20 groups of LAP time can be recorded )
a.
In Stopwatch Mode, press D to start, press C to enter LAP time, to display the timing state after displaying
the last group of LAP time for 5 seconds, then press D to stop and automatically record into the last group
of LAP.
b.
When stopped, press B to enter the memory data to view the LAP time and TOT(total time) press D to
view the data upward, press C to view the data downward. In viewed and stopped state, hold down C for 3
seconds to clear all LAP records, the data will flash in 3 seconds when is going to clear.
c.
The stopwatch will continue counting if you don’t stop it, and it will stop at 99 hours, 59 minutes, 59.99
seconds when up to its measuring limited. Stopwatch will not restart to measure from 0.
d.
When stopwatch is running, press B for one second to return to normal time, the stopwatch will run at the
background.
e.
When 20 groups of LAP time is recorded fully, new LAP time will not able to be recorded, the indicator of
“FULL” will flash on the screen.
f.
In record mode, if the TOT (total time) is over 99hours, 59minutes, 59.99 seconds, the indicator of
“FULL” will flash on the screen.
Battery life ( type CR2032 )
：
12months ( base on below usage)
Game operation once (vibration for 50 times) per week, EL backlight operations 4 times/day and each time second
for about 3 seconds.
开始
停止
压住
A
键
3
秒
压住
C
键
3
秒
D
键
C
键
C
键
开始
清除
停止
Start
Stop
Start
Button D
Button D
Button D
Button D
Hold down Button
C for one second
Stop
Clear