Spinor AK TOM mini, Manual, Page: 37 / 56

37
4.6. The apparatus can be used in buildings with hardwood, concerte or ceramic
tile floors. If the floors are carpeted, relative humidity should be not less than 30%.
4.7. Before use, it is recommended that the oscillator be disinfected with a flan-
nel cloth (or gauze, cotton ball), lightly moistened with ethyl alcohol. Before disin-
fection the cloth should be thoroughly squeezed out.
4.8. To prevent liquid from getting inside the body of the oscillator, yOU MUST
nOT wipe the EHF oscillator with a very moist cloth.
4.9. With the permission of the company producing devices are allowed to use
other special disinfectants.
4.10. The «Mode» and «Start» buttons should only be pressed at intervals of at
least 1~2 seconds, otherwise a failure or false start may occur.
4.11 . Care must be taken when working with the detached EHF-oscillators to
protect them from blows, bumps and falls to avoid damage.
4.12. The apparatus should only use the cable supplied, or a USB 2.0 AM/mini B
5P type cable from «Belsis», «Hama», «Sony», «Link Bits» or «Gembird». The length
of the connector cable to the detached oscillator must be at least 0,5 m and no more
than 1,8 m.
4.13. The use of cables of other lengths or types is prohibited, as this can cause
an increase in interference emission and a decrease in resistance to interference.