Data subject to change without notice
– June.09.2021 (F)
SPINNER GmbH
│ Erzgiessereistr. 33 │ 80335 München │ Germany │ www.spinner-group.com │ [email protected]
Method 2: Tightening screw mounting
Drill a hole with ≥ 22 mm diameter into the suspended ceiling to pass the connectors of the
antenna. Then drill 2 resp. 4 holes with 6 mm diameter into suspended ceiling and put the plastic
dowels into the holes. Lock the antenna with tightening screws (M4*25 mm), then cover lids.
The method is applicable for antennas A77137, A77137C0001, A77142, A77142C0001, A77143,
A77146, A77146C0003, A77147 and A77148.
2.2 Warning:
Please respect the cable bending radius of minimum 40 mm.
