0
1
USING THE SCREW-DOWN
CROWN
Do
NOT
pull the crown unless it is
UNSCREWED first:
NOTE:
Failure to SECURELY screw down the
crown after setting the watch may affect its
water resistance.
TO UNSCREW:
Turn the
crown anti-clockwise until it
turns freely without tension.
GENTLY pull the crown out
to the other desired
positions for watch setting
(see specific operating
instructions on the following
pages).
TO SCREW:
Push the crown
ALL THE WAY IN (towards
the watch) THEN begin to
turn clockwise until it is
securely screwed down.
0
1
Before you use this watch,
It is recommended that you manually
wind the mainspring to start it
moving.
This Watch Is An Automatic Watch Equipped
With A Manual Winding Mechanism.
WINDING THE MAINSPRING
1. Unscrew the crown by
turning it anti-clockwise.
2. When it is in position
[1]
,
turn the crown clockwise
to wind. Wind 5-10 times
and it will start to move
naturally after shaking
slightly.
3. Push the crown in then
screw it securely.
2
3
