PulseBlasterESR-PRO
Related Products and Accessories
1. Oven Controlled Clock Oscillator (sub-ppm stability) shown in Figure 18. For ordering information,
http://www.spincore.com/contact.shtml
2. Ribbon Cable with 2x13 IDC plug and DB-25 (Parallel port style*) connector on PC bracket. Please
note this uses a standard computer ribbon cable. For ordering information, contact SpinCore at
http://www.spincore.com/contact.shtml
Figure 19:
PulseBlasterESR-PRO Parallel Port Interface Cable.
*Note: This is NOT a parallel port and will not work with a PC printer or other such
peripheral devices! This cable uses the parallel type DB-25 connector to easily access the
TTL bits of the PulseBlasterESR-PRO Board.
2019/09/26
Figure 18:
An Oven Controlled Clock Oscillator (or OCXO) with sub-ppm frequency stability is
available for the PulseBlasterESR-PRO upon request.
