PulseBlasterESR-PRO
III. Programming the PulseBlasterESR-PRO
SpinCore Technologies Inc. is dedicated to providing an easy and efficient method of programming your
board. Various control methods available are detailed below, making PulseBlaster products flexible for any
number of applications.
Special consideration of the ESR-PRO Short Pulse feature must be taken when programming or
operating this board. For signals of instruction time greater than 10 ns, the Short Pulse feature must be
disabled by setting output bits 21-23 to HIGH at all times. For more information, see
The PulseBlaster Interpreter
The PulseBlasterESR-PRO can be programmed using
PulseBlaster Interpreter
, which is a free
programming utility provided by SpinCore for writing pulse programs. This easy-to-use editor allows you to
create, edit, save, and run your pulse sequence. Figure 2, below, shows the PulseBlaster Interpreter being
used with an example program.
2019/09/26
Figure 2:
Graphical Interface of PulseBlaster Interpreter. The example shown
creates a pulse that toggles all TTL bits on for 100 ms, then off for 500 ms, and
repeats.
