manualshive.com logo in svg

Spin-W SW-G190E, Instruction Manual

Share
Download
Spin-W SW-G190E Instruction Manual Download Page 18

Auto Arm/Disarm

Auto Arm/Disarm

This function can make the alarm system automatically Arm/Disarm in preset time for 

everyday.

Password Setting

Pin Setting

Reset

Auto Arm/Disarm >

SUN

--:--  Away Arm

--:--   Stay Arm 

--:--       Disarm

MON

--:--  Away Arm

--:--   Stay Arm 

--:--       Disarm

Touch "        " to delete the default time, and input new time e.g: 1200, touch "

▲▼

"  navigate to next time 

setting, touch "OK" to save, it will navigate next day for auto arm/disarm setting.

Notice:

The time format should be 12:00,  hours then minutes. Wrong time input can not be saved.

X

Temperature Control

This system is built-in temperature sensor for monitoring onsite temperature. You can set the upper limit 

and lower limit to make temperature alert (NC. dry contract output).The temperature range can be from 

00° ~ 70° . If you enabled SMS notification, then it will send the text message alert. If choose output OFF, 

then the dry contract will be used as alarm output.

Temp Control

Speed Dial

Temp Upper limit

                      

                        32

Output On            >

Temp Lower limit

                      

                       15

Output Off           >

18

Summary of Contents for SW-G190E































Reviews:

No comments

Brands by name

Popular brands

Load more brands