Spin Master Ltd., 450 Front Street West,
Toronto, ON M5V 1B6 Canada
Customer Service: 1-800-622-8339
Email: [email protected]
Spin Master Inc., PMB #10053,
300 International Drive, Suite 100,
Williamsville, NY 14221, USA
www.spinmaster.com
TM & © Spin Master Ltd. All rights reserved. The item inside this package may vary
from the photographs and/or illustrations. Please retain this information for future
reference. Please remove all packaging materials before giving to children. An adult
should periodically check this toy to ensure no damage or hazards are found,
if so, remove from use. Children should be supervised during play.
Store in a cool dry place. Food products developed and
manufactured by Food-Tek, Inc. Whippany, New Jersey, U.S.A.,
07981-1540. TOY PARTS MADE AND ASSEMBLED IN CHINA.
T86100_0001_20057692_NEN_IS_R2
REFILLS ALSO AVAILABLE!
TROUBLESHOOTING
PROBLEM
SOLUTION
Mix in food pouch has hardened.
Cake batter/icing is too thick.
Cake batter is too runny.
Icing is too runny.
Cake batter is not dispensing
out of the nozzle.
Cake balls did not form.
Cake pop fell off the stick.
Unable to disassemble batter
tank.
Top cap pops off.
This may happen during storage. Break up the
pieces with a spoon until the mix returns to a
powder state.
Using small spoon, add small scoops of water and
stir until smooth.
If your cake batter is too runny, refrigerate cake
pops in tray a few minutes longer.
Place icing in refrigerator for a few minutes,
allowing icing to thicken.
Be sure to rotate the crank in a clockwise direction.
Evenly fill each sphere of the tray as much as
possible. Place in refrigerator for at least 15 minutes
to allow the batter to completely rise.
Re-insert the stick into the cake pop and use the
spatula provided to apply icing.
Twist off the top cap and nozzle. Then remove
plunger, and slide apart the inner and outer tanks.
Make sure threads on top cap and inner tank
are aligned.
Washing and Care Instructions:
• Prewash all Cake Pop Maker™ components BEFORE use.
Dry with a clean hand towel.
• Use cleaning brush (not included) to clean hard to reach places.
• Wipe down all parts with a dishcloth and rinse thoroughly under hot water.
• DO NOT put Cake Pop Maker™ or plastic parts in dishwasher, microwave or oven.
Visit umagineactivities.com for more details.
8