C
M
Y
CM
MY
CY CMY
K
23
English
OPERATION
Last number redial
If you wish to call the last number dialed, obtain dial tone by lifting up the handset and then press the
.
This is an interesting function when the dialed number is busy all the time. Then, you can repeat the procedure until
you get the line through.
Flash time
If you have subscribed the call waiting service from your local phone company, you will be able to receive a second
call while you are processing a conversation. In this case, you will hear a beep tone to advise you have a second
call. You can accept the second call by pressing the R button and then the
2
key. In this case, the first call will be
hold and you can talk to the second.
To resume the first conversation and hold the second one, press the R button and then the
1
key. To switch again
to the second call, press R and then
2
.
To make a 3 party conference, you can press the R button and then the
3
key. After that, both calls and you will
be connected and you will be able to talk simultaneously.
If you have connected your Spiker PH539 in a PABX system, you can transfer a call by pressing the R button and
then dialling the number of the extension where you want to transfer the call.
Pause
Use the P button (marked as 14 in the keypad diagram on page 18) to insert a 3.6 seconds pause in the dialling
sequence.
