S P I K E T R I O U S E R G U I D E
14
Assembly –
Pumps
If you’re using our Spike System table leg mount, you’ll need to
rotate one pump 180°. To rotate the pump head, remove the
four screws, rotate the head 180°, and tighten the screws. Both
pump heads should show ‘In’ at the top and ‘Out’ at the bottom.
IN
IN
OUT
OUT
When setting up your pumps for 30-gallon and 50-gallon
kettle systems, ensure that you mount the pumps to the center
leg so that your hoses will reach from the kettles to the pumps.
