11) Loosely Install Bolts, Washers and
Nuts. Nuts should be towards the
outside of the vehicle. Washers
should be on the bolt side of the
frame.
12) Adjust door front and back so seal
sits to the inside of the windscreen.
TIP: The OEM door may need to be
adjusted forward and backward to create a
seal on the ROPS, ensure the front triangle
creates a good seal.
TIP: Front corner of upper door can be
bent to seal better
13) Tighten all hardware
14) Open door and engage snap on top
of Upper Door Sill Assembly
NOTICE
Steps 15 through 16 should
be done with caution to not damage
the seal on of the rear window or the
window itself.
15) Fasten the upper most strap through
the seal on the rear window through
the plastic Loop Lock on the door
then attach it back to itself.
16) Install lower hook and loop straps
through the seal of the rear window
and attach around ROPS
17) Close window on door
18) Reinstall Lower Door Panel with 6
screws removed in Step 5
