COMPETITION CRANK BALANCE BEAM
Assembly Instructions
Page 3 of 8
1. Assembly and adjustment instructions
Please note that the Beam Legs and Beam Top are heavy and can be difficult to balance
if not held properly during handling. Two (2) qualified persons are required when
assembling this apparatus. Also watch fingers on swinging parts of beam legs.
1.1. Assembly
Please refer to the Figure 1 below for part names and locations.
1.
To assemble you will need two (2) 9/16” wrenches or adjustable wrenches & one (1) 15/16”
wrench.
2. Fully open the shipping crate containing the
Beam Top
. Turn the
Beam Top
upside down on a
clean surface. This will protect the
Beam Top
from being soiled or damaged during assembly.
3. Remove the
Beam Legs
from their shipping cartons and work with one
Beam Leg
at a time.
Figure 1
