SK599-AT5
Drive line
Truck
11-14
SPIERINGS MOBILE CRANES USER MANUAL V 0.1
D
ec
2
01
6
C
h
an
ges
an
d t
y
po
gr
ap
hi
c
al
er
ro
rs
res
er
v
ed.
©
20
1
6
S
pi
er
ings
M
obi
le
C
ran
es
–
A
ll r
ight
s
re
se
rve
d
.
-
Use the supplied air pressure gauge (
-
Inflate the tyres to the indicated pressure range, if necessary;
2. Use compressed air to bring the tyre at the proper pressure (9.0 to 9.2 bar);
3. Mount the valve cap with the correct sealing ring on the valve.
11.6.
Brake linings
11.6.1.
Checking brake linings
At the rear of every brake drum, it can be checked if the brake linings are still thick enough to drive
safely on the road (
).
1. Remove the rubber sealing ring out of
hole B
2. Check the thickness of the
brake lining
C
;
3. Mount the rubber sealing.
Replace the brake lining (see §
14.2.3. Specifications axles / brakes / tyres
), if it is worn to the wear
ring, which is indicated on the brake lining.
It is recommended to have the brakes tested on a brake analyser every year.
CHECK / TEST!
Check the brake linings during maintenance or at least once a year at normal
operating condtions.
Picture 11-13
CAUTION!
It is harmful for the tyres to have a tyre pressure below 9.0 bar!
Check the tyre pressure daily.
