SPIERINGS SK599-AT5 Manual Download

Page: 148 / 238

SK599-AT5
Maintenance truck
Truck

5-8

SPIERINGS MOBILE CRANES USER MANUAL V 0.1

ges

d t

res

ed.

ings

obi

ran

–

ll r

ight

rve

5.3.8.

Maintenance schedule lubrication truck

Maintenance

service

truck

Daily

Weekly

Bi-monthly

30,000 km/
yearly

Other

Automatic lubrication
system

Manual lubrication

5.3.9.

Maintenance schedule others truck

Maintenance

service

truck

Daily

Weekly

Bi-monthly

30,000 km/
yearly

Other

Windscreen washer
fluid

Fire extinguisher

Seat belt

Air conditioning

The air conditioning system contains coolant under high pressure.

It is NOT ALLOWED to remove parts of the air conditioning system!

INFORMATION!

Remove excess grease timely to prevent damage.

CAUTION!

The fire extinguishers must be checked annually by an approved body.
The user himself must arrange this inspection.

CAUTION!

Working on the air conditioning system may only be carried out by qualified

personnel!

INFORMATION!

If the air conditioning system is not functioning properly, it should be restored as
soon as possible to prevent major damage to the system.

When there is doubt, please contact Spierings Mobile Cranes.

Table 5-8

Table 5-9

Summary of Contents for SK599-AT5










































































































































































































































Search results

Summary of Contents for SK599-AT5

Reviews:

Related manuals for SK599-AT5

Brands by name

Popular brands

SPIERINGS SK599-AT5, Manual

Search results

Summary of Contents for SK599-AT5

Reviews:

Related manuals for SK599-AT5

Brands by name

Popular brands